For systems where the radio range of the control panel is not sufficient, the radio coverage of a building can be increased by. The Z6000 booster panel is mains powered and uses a 7.0Ah battery for 72 hours standby.Up to a maximum of 7 boosters can be installed on a system, which are automatically configured, and relay information around the network. The EDA-Z6000 is equipped with 4 programmable relays. By default these are configured as a fire routing relay, a fault failsafe relay and 2 sounder circuits. The panel is also equipped with 2 monitored inputs, which can be used to put the Zerio Plus system into alarm. Lastly the panel has 2 sets of RS485 terminals, allowing connection of wired antennas or remote displays.The installer does not require expensive additional equipment to configure the complete system. The internal memory card is used to copy the main panel configuration to the booster panel. Internal configuration and operating data can be downloaded on to a USB memory stick and then analysed on a PC. Configuration is also stored on a removable memory card for backup.