The EcoLeak™ Eco-1 leak detection alarm panel is designed for use with all AquiTron and TraceTek sensing cables and sensors for detection of water, acid, hydrocarbon liquids (fuels) leaks. The Eco-1 single zone alarm panel now incorporates fault/cable break monitoring for added protection and peace of mind. The LED’s located on the faceplate indicate Power, Leak alarm and Cable break. In the event of a leak or fault, the alarm sounds and the corresponding LED illuminates. The operator silences the alarm by pressing the MUTE button. Once the alarm has been silenced, the Leak or Cable break LED will continue to be illuminated. Once the cause of the alarm has been located and recti?ed the panel can be reset and the corresponding LED will be extinguished. Resetting the panel also resets the volt free alarm relay contacts. The Eco-1 also has an ‘auto-reset’ feature. If enabled it will allow the panel to reset itself once the leak or fault has been cleared. Any loss of system integrity, whether caused by an interruption of power or a break in a sensing circuit, will cause the Break/Fault relay to operate.
|| Zonal leak detection panels
|| Single zone alarm
|| Alarm and zone locating module panels
|| 110 to 240 Vac, 50-60 Hz
|| 0,40 kg